Quad Bike Service & Repairs

All Parts /  Fluids used are Genuine Pure Polaris. 

Example of a Service procedure

Engine oil changed, oil filter changed.

Transmission oil changed.

Rear case oil changed.

Front Case / Hubs oil changed.

Air filter changed.

Prefilter changed, if not fitted we'll put one on.

Sediment tube emptied.

Radiator levels checked, adjusted.

Spark plugs changed, new plugs gapped.

Grease round all grease zerks, and check unsealed electric connectors for corrosion and regrease connections with Nyogel electrical grease.

Tyre pressures checked / adjusted.

Timing checked.

Idle adjusted.

Other points are checked, relevant to model type, where applicable. 

All round checks carried out:

Throttle movement checked, free play adjusted.

Brake pads / discs checked , adjusted / renewed, if necessary.

Wheel hub bearings checked / renewed if necessary.

Tie rod ends checked for play, greased. Toe out checked. 

Lights checked, bulbs replaced if necessary.

Chain tension adjusted, shaft drives inspected for play at Universal Joints, greased.

CV boots checked for wear CV joints checked for play,and greased.  

Service report issued with suggestions for future work advised and quoted for. 

All work quoted for is priced on a flat rate times. 

Basic Labour rate is £35 per hour.